Printing Materials		MH28514
Guide Information
TAK PRINTING CO LTD
9-7 NARIHIRA 1-CHOME, SUMIDA-KU TOKYO 130-0002 JP
label or stock dsg/overlamination dsg*: TAK-04PTU/TAK-L01U
Pressure-sensitive systems
Description: overlaminated printed white polyester (PET) facestock with adhesive which is protected by a release liner

Suitable for additional printing with one or more of the following inks (in the black color unless otherwise indicated):
Thermal transfer ribbon
Ricoh	B110C, B110CX
Toshiba TEC	BR(e)R2 ((e) is replaced by a four digit number representing the size of the roll), BR(e)R7S ((e) is replaced by a four digit number representing the size of the roll), BR(e)R8S ((e) is replaced by a four digit number representing the size of the roll)

Application Surface	Max Temp (°C)	Min Temp (°C)	Indoor Use	Outdoor Use	Additional Conditions
Acrylic paint	100	-40	Yes	Yes	-
Acrylonitrile butadiene styrene	100	-40	Yes	Yes	-
Aluminum	100	-40	Yes	Yes	-
Anodized aluminum	100	-40	Yes	Yes	-
Epoxy	100	-40	Yes	Yes	-
Epoxy paint	100	-40	Yes	Yes	-
Epoxy powder paint	100	-40	Yes	Yes	-
Galvanized steel	100	-40	Yes	Yes	-
Melamine paint	100	-40	Yes	Yes	-
Nickel plated metal	100	-40	Yes	Yes	-
Polybutylene terephthalate	100	-40	Yes	Yes	-
Polycarbonate	100	-40	Yes	Yes	-
Polyester paint	100	-40	Yes	Yes	-
Polyester powder paint	100	-40	Yes	No	-
Polyethylene terephthalate	100	-40	Yes	No	-
Polyurethane paint	100	-40	Yes	Yes	-
Polyurethane powder paint	100	-40	Yes	Yes	-
Stainless steel	100	-40	Yes	Yes	-
Phenolic - Phenol Formaldehyde	80	-40	Yes	Yes	-
Polyphenylene oxide/ether	80	-40	Yes	Yes	-
Polypropylene	60	-	Yes	No	-
Polystyrene	60	-40	Yes	Yes	-
Polyvinyl chloride	60	-40	Yes	Yes	-
Unsaturated polyester - thermoset	60	-40	Yes	Yes	-
Alkyd paint	100	-40	Yes	Yes	-
Bare steel	100	-40	Yes	No	-
Polyphenylene sulfide	80	-40	Yes	No	-
Polyethylene	60	-40	Dry	No	-

Dry -	Use limited to indoor dry locations.
* -	Overlamination is to be applied after additional printing.

Report Date:	2002-07-31	© 2024 UL Solutions
Last Revised:	2023-06-19